Windows Update Error 0x8024401c [Fixed]

Windows Update Error 0x8024401c [Fixed]

If you have been having trouble with your Windows OS update, then this is the article for you. Here, we will show you different ways to fix the Windows Update Error 0x8024401c in your Windows PC. So, stay with us!

When you’re trying to update your Windows PC and you see the error 0x8024401c, it can be a real hassle. You might feel frustrated and think that there’s nothing to do about it. Rest assured, with some patience and the right troubleshooting tips, you will be able to diagnose the issue and fix it in no time.

The problem of updating Windows 10 is one that many PC users are having a hard time with. It is not just a simple process, as it requires a lot of time and research. There have been many different ways to fix this error in the past, but now we’re going to show you exactly how to solve the update error in Windows once and for all!

Methods to Fix Windows Update Error 0x8024401c

Methods To Fix Windows Update Error 0x8024401c

By Inspecting Your Windows PC Network Settings

A slow or poor internet connection might turn out to be the sole reason behind the occurrence of this Windows Update Error 0x8024401c. This is because your system will be unable to connect to the servers and install the update successfully.

In this case, you can switch your Wi-Fi connection to some other network or instead use an ethernet cable. Test whether the Wi-Fi connection is more stable than the wired one or vice versa, and then opt for the one giving more promising results. 

You must also make sure to disable/uncheck the IPv6 network inside your PC ethernet properties. Here’s how this can be done.

  1. First, right-click on the Windows icon appearing in the bottom left-hand corner of your PC screen.
  2. Next, from the context menu click on the option labeled Run.
  3. After that, inside this box type in the following command i.e., ncpa.cpl
  4. Now, press the Enter key on your keyboard to execute the typed-in command successfully.
  5. Next, once the command is run completely, you will see a new window pop-up on your screen with the label Network Connections.
  6. After that, right-click on your Wi-Fi option followed by clicking on Properties from the context menu.
  7. Now, a new window will pop up on the screen with the label Wi-Fi Properties. 
  8. Next, inside this window, click on the tab named Networking.
  9. After that, click on the checkbox present on the left-hand side of the Internet Protocol Version 6 (TCP/IPv6) option to disable it.
  10. Finally, go on and reboot your PC. Now, once your system is restarted, check to see if the error is resolved or still persists.

By Updating Any Outdated Drivers

At times, there might be issues occurring with your Windows OS due to outdated drivers. In this case, the best solution is to update the drivers to the latest version. Follow the next mentioned step-by-step guide to do it successfully and resolve the problem at the earliest.

  1. First, download DriverEasy software on your PC.
  2. Next, once downloaded successfully, proceed with installing it on your system.
  3. After that, launch this software and click on the Scan Now button.
  4. Now, a complete scan will be run and all the problematic and outdated drivers will show up on the PC screen.
  5. Finally, click on the Update All button present at the bottom right-hand corner. This will start updating the drivers and once finished all the drivers will be updated to their latest versions.

That’s it! Now, examine the behavior of the error i.e., whether resolved or still causing problems with Windows update installation.

By Scanning & Repairing Corrupted System Files

Another thing that might be uplifting this error is the corrupted system files. You can scan these files using the Command Prompt or Windows Powershell. Here is how to do it.

  1. First, right-click on the Windows icon appearing in the bottom left-hand corner of your PC screen.
  2. Next, click on the option labeled Windows Powershell (Admin) from the context menu.
  3. After that, Windows Powershell (Admin) will be launched.
  4. Now, inside this window type the following command i.e., sfc /scannow followed by hitting the Enter key on your keyboard. This will start executing the command and running a complete scan.
  5. Next, some prompts will appear while the scanning process is in progress. You just need to type “Y” and press the Enter key.
  6. Finally, this sfc tool will automatically scan all the corrupted system files and repair them in the best possible manner by itself. This may also play a huge part in resolving the Windows update error 0x8024401c.

By Running a Clean Boot 

Windows Update Error 0x8024401c can also be fixed by running a clean boot. Follow the next mentioned steps in sequential order to perform this task successfully.

  1. First, click on the search bar at the bottom of your PC screen.
  2. Next, type in msconfig inside of it.
  3. After that, click on the System Configuration option.
  4. Now, go to the tab named Services and click on it.
  5. Next, click on the checkbox appearing on the left-hand side of the option labeled Hide all Microsoft services. 
  6. After that, click on the Disable all button.
  7. Now, move back to the System Configuration main window and click on the tab named Startup. 
  8. Next, click on Open Task Manager written in the middle of the screen.
  9. After that, pick every startup item available in the Task Manager and select Disable.
  10. Now, go on and close the Task Manager. 
  11. Next, click on OK in the Startup tab of the System Configuration window.
  12. Finally, reboot your PC and you will present inside the clean boot environment. Now, proceed with installing the Windows update and see if the error is coped with successfully or not.

By Altering the Settings in Registry Editor

  1. First, right-click on the Windows icon appearing in the bottom left-hand corner of your PC screen.
  2. Next, from the opened context menu, click on the option labeled Run.
  3. After that, inside the Run box type in the following command i.e., regedit
  4. Now, click on the OK button.
  5. Next, navigate to HKEY_LOCAL_MACHINE -> Software -> Policies -> Microsoft -> Windows -> WindowsUpdate.
  6. After that, inside the WindowsUdpate folder, click on the AU folder and look for UseWUServer.
  7. Now, change whatever is in the registry value data on the right pane with ‘0’.
  8. Finally, save the changes by clicking on the OK button. 

Now, reboot your PC and examine if you are now able to install the Windows update hassle-freely.

See also: How to Fix Windows Installer Error 0x0

Conclusion

There you have it! Five methods to fix the Windows Update Error 0x8024401c. We hope that at least one of these has worked for you and that you can now continue with updating your Windows 10 PC without any issues or problems.

What are your thoughts on this article? Kindly provide your feedback and opinion in the comments section below and let us know how you feel about it. If you liked it share it with your family members, and loved ones and give us a thumbs up. Thank you all in advance guys, and stay blessed. 

Leave a Comment

Your email address will not be published.